propellant gas

For shorter ranges, part of the propellant gases escape to the side.

During dispensing, the beverage comes directly into contact with the propellant gas.

This is a two-compartment system, with no contact between the propellant gas and the beverage.

The propellant gases were created with a 20 mm cannon mounted on the roof.

Propellant gases hissed from its leg joints as it began to stalk forward.

Propellants are burned or otherwise decomposed to produce the propellant gas.

Expanding propellant gases are diverted through a hole in the barrel into a chamber.

Her forward turret was disabled after the propellant gas extractor broke down.

That means it uses a nuclear thermal reactor to heat an indigenous propellant gas as a reaction mass.

When the propellant gas is expanded, the propellant molecules move away from each other.

These propellant gases push on the bullet base.

The pistons jam at the ends of the barrel trapping the hot propellant gases inside.

The primary flash is caused by propellant gases exiting the firearm behind the bullet.

The cartridge, also unique, plays an important part in sealing the gun to the escape of propellant gases.

It has the disadvantage of the propellant gas (and the accompanying fouling) being blown directly into the action parts.

Both are used as refrigerant and propellant gasses.

But more recent concerns about the ozone-eating chlorofluorocarbons used as propellant gases sent sales plummeting.

Modern baffles are usually carefully shaped to divert the propellant gases effectively into the chambers.

With a retro-firing of propellant gas the pods then stopped at the very edges of the display zone.

A portion of the expanding propellant gas was tapped off from the barrel, driving a piston to the rear against a spring.

A propellant gas above the liquid presses the liquid down, driving flows upwards through the spear.

Even more unusual are fully contained magazines, incorporating both a source of propellant gas and force-fed paintballs.

The propellant gas conducted into the buffer is used to soften the impact of the actuating slide when it reaches the back plate.

Propellant gas heats and erodes the baffles, causing wear, which is worsened by high rates of fire.

The propellant gases continue to exert force on the bullet and firearm for a short while after the bullet leaves the barrel.